Free U.S. shipping on every product · No minimum
Clearhouse
Find My Water System0
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Greenlee County water quality report

Find My Water System
Showing utility report

Morenci Water & Electric — Morenci

2025 annual report; individual sample dates shown

Morenci Water & Electric — Morenci. Match the system name on your water bill.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Hardness

Test needed

Not reported

No numeric hardness in the reviewed report. Test incoming water before softener sizing.

2025 annual reportView source

Total trihalomethanes

Annual average below listed limit

39.63µg/L

Running annual average; individual samples 15–91

80 µg/L MCL

The report uses an annual average; an individual sample is not the compliance result.

2025View source

Haloacetic acids (HAA5)

Below listed limit

20.74µg/L

Running annual average; sample range 8.7–58

60 µg/L MCL

2025View source

Fluoride

Below listed limit

0.58mg/L

Reported result

4 mg/L MCL

January 2021View source

Lead (90th percentile)

Below listed limit

0.68µg/L

No samples exceeded the listed action level

15 µg/L action level

2024View source

Arsenic

Below listed limit

1.6µg/L

Reported result

10 µg/L MCL

January 2021View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not reported — test needed2025 annual report
Not reported — test needed2025 annual report
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report ↗

What was measuredReported amountSample year / source dateHow to read it
HardnessNot reported No numeric hardness in the reviewed report. Test incoming water before softener sizing.2025 annual reportView source ↗Test needed
Total trihalomethanes39.63 µg/LRunning annual average; individual samples 15–912025View source ↗Annual average below listed limitThe report uses an annual average; an individual sample is not the compliance result.
Haloacetic acids (HAA5)20.74 µg/LRunning annual average; sample range 8.7–582025View source ↗Below listed limit60 µg/L MCL
Fluoride0.58 mg/LReported resultJanuary 2021View source ↗Below listed limit4 mg/L MCL
Lead (90th percentile)0.68 µg/LNo samples exceeded the listed action level2024View source ↗Below listed limit15 µg/L action level
Arsenic1.6 µg/LReported resultJanuary 2021View source ↗Below listed limit10 µg/L MCL
Copper (90th percentile)0.1 mg/LNo samples exceeded the listed action level2024View source ↗Below listed limit1.3 mg/L action level
Disinfectant residualSee report The listed annual average and sample range do not align2025 reportView source ↗Utility clarification neededNo single disinfectant concentration is assigned in this guide.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation ↗

Hardness source ↗USGS hardness classification ↗

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →

Next: match my home →

Source water. Surface water from Eagle Creek.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Choose Morenci or Clifton to see the correct source results.

MWE publishes separate reports for Morenci and Clifton. Morenci uses Eagle Creek surface water, and its results must not be assigned to Clifton, Duncan, other Greenlee County systems or private wells. Compare averages with averages and keep older sample years visible.

Filter vs. softener: what each doesPlan installation with your plumber

A useful local question

Why do Morenci and Clifton have different results?

They are separate water systems with separate reports and sampling. Select the system on your bill. Morenci’s trihalomethane annual average and individual sample range are different statistics; use the report’s compliance basis when comparing them.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Different name on your water bill?

The systems covered here publish separate reports. Use the official links to confirm your utility and system. If yours is not listed, choose Other / not sure.

Sources reviewed November 14, 2026. Individual sample years are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →
Your homeFind my system →