Water hardness
Soft average32mg/L as CaCO₃
Published annual average
USGS soft range: 0–60 mg/L
About 1.9 gpg; reported range 27–35 mg/L.
2025 annual report; individual sampling dates shown
Results below are for Charlotte Water. Other water systems in Mecklenburg County may have different results.
See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.
32mg/L as CaCO₃
Published annual average
USGS soft range: 0–60 mg/L
About 1.9 gpg; reported range 27–35 mg/L.
63.7ppb
Highest locational running annual average
Report MCL: 80 ppb
Reported range 17.2–77.4 ppb. Compliance uses locational annual averages.
22.9ppb
Highest locational running annual average
Report MCL: 60 ppb
Reported range 10.4–24.5 ppb. Compliance uses locational annual averages.
1.04ppm
Running annual average
Report MRDL: 4 ppm
Reported range .47–1.60 ppm; a disinfectant residual.
0.65ppm
Annual average
Report MCL: 4 ppm
Reported range .04–.81 ppm.
NDppb
90th percentile
Report action level: 15 ppb
One sampled site exceeded 15 ppb; the reported range was ND–44 ppb.
Continue with your home details for general filtration guidance. We will not use another utility’s numbers as your result.
Find My Water SystemA city report cannot establish a well’s water quality. Well-water treatment depends on your test results and site conditions.
Explore well-water systemsThe figures below are provider-specific. They are not a countywide average.
| Utility | Hardness | Hardness source |
|---|---|---|
| 32 mg/L · 1.9 gpg average | 2025 annual utility report |
Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.
Open the complete utility report
| What was measured | Reported amount | Sample year / source date | How to read it |
|---|---|---|---|
| Water hardness | 32 mg/L as CaCO₃Published annual average | 2025View source | Soft averageAbout 1.9 gpg; reported range 27–35 mg/L. |
| TTHM | 63.7 ppbHighest locational running annual average | 2025View source | Below 80 ppbReported range 17.2–77.4 ppb. Compliance uses locational annual averages. |
| HAA5 | 22.9 ppbHighest locational running annual average | 2025View source | Below 60 ppbReported range 10.4–24.5 ppb. Compliance uses locational annual averages. |
| Chlorine | 1.04 ppmRunning annual average | 2025View source | Below 4 ppmReported range .47–1.60 ppm; a disinfectant residual. |
| Fluoride | 0.65 ppmAnnual average | 2025View source | Below 4 ppmReported range .04–.81 ppm. |
| Lead | ND ppb90th percentile | 2025View source | Below reporting limitOne sampled site exceeded 15 ppb; the reported range was ND–44 ppb. |
In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.
MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.
PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation
Choose the system size, keep useful existing equipment, and review your filtration goals.
Source water. Surface water from Mountain Island Lake and Lake Norman, treated at the Franklin, Dukes and Vest plants.
Email delivery is coming soon. Copy the report link to share it now.
More about your local water
Water-quality guidance for Charlotte and surrounding Mecklenburg County communities.
Charlotte Water’s total-hardness result is low. Filtration can address taste and odor goals without assuming that every home needs softening.
A useful local question
The measured results on this page come from Charlotte Water. Check your water bill to confirm your system. If you use another utility or a private well, select that option and use the matching report or a current well test.
We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.
Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.
Sources reviewed November 20, 2026. Individual sampling dates are shown with each result.
Your water → your home → your system
Choose the system size, keep useful existing equipment, and review your filtration goals.