Free U.S. shipping on every product · No minimum
Clearhouse
Find My Water System0
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Delaware County, Indiana Water Quality Report

Find My Water System
Showing utility report

Indiana American Water — Muncie

2025 report; individual sample dates shown

For Indiana American Water’s Muncie system (IN5218012). Other Delaware County systems and wells are not represented by this report.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Hardness

Very hard

354ppm

Reported level; approximately 20.7 gpg

Sample range: 230–432 ppm.

2025View source

Chloramines

Below 4 ppm MRDL

2.03ppm

Highest running annual average

Chlorine is reported separately at 1.59 ppm RAA.

2025View source

TTHMs

Below 80 ppb MCL

36.1ppb

Highest reported locational running annual average

2025View source

HAA5

Below 60 ppb MCL

11.8ppb

Highest reported locational running annual average

2025View source

Fluoride

Below 4 ppm MCL

0.61ppm

Reported plant result

2025View source

Lead

Below the report’s 15 ppb action level

2ppb

90th percentile at sampled taps

A utility percentile is not a test at your tap.

2025View source

Copper

Below the report’s 1.3 ppm action level

0.797ppm

90th percentile at sampled taps

1 of 31 sampled sites exceeded the report’s action level; highest sample 1.463 ppm.

2025View source

Nitrate

Below 10 ppm MCL

2.31ppm

Reported plant result

2025View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
354 ppm reported level · very hard2025
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report ↗

What was measuredReported amountSample year / source dateHow to read it
Hardness354 ppmReported level; approximately 20.7 gpg2025View source ↗Very hardSample range: 230–432 ppm.
Chloramines2.03 ppmHighest running annual average2025View source ↗Below 4 ppm MRDLChlorine is reported separately at 1.59 ppm RAA.
TTHMs36.1 ppbHighest reported locational running annual average2025View source ↗Below 80 ppb MCL
HAA511.8 ppbHighest reported locational running annual average2025View source ↗Below 60 ppb MCL
Fluoride0.61 ppmReported plant result2025View source ↗Below 4 ppm MCL
Lead2 ppb90th percentile at sampled taps2025View source ↗Below the report’s 15 ppb action levelA utility percentile is not a test at your tap.
Copper0.797 ppm90th percentile at sampled taps2025View source ↗Below the report’s 1.3 ppm action level1 of 31 sampled sites exceeded the report’s action level; highest sample 1.463 ppm.
Nitrate2.31 ppmReported plant result2025View source ↗Below 10 ppm MCL
Chlorine1.59 ppmHighest running annual average2025View source ↗Below 4 ppm MRDLIndividual range: 0.81–2.34 ppm; separate from the chloramine result.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation ↗

Hardness source ↗USGS hardness classification ↗

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →

Next: match my home →

Source water. Muncie’s supply combines the White River, Prairie Creek Reservoir and four groundwater wells.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Muncie combines river, reservoir and groundwater sources. The report lists chlorine and chloramines separately, so the two disinfectant measurements are not added together.

The utility’s copper percentile is below its action level, but one sampled home was above it. That difference is why system-level sampling cannot replace a test of plumbing at a specific home.

Filter vs. softener: what each doesPlan installation with your plumber

A useful local question

What should a Muncie filter and softener address?

Match filtration to the documented chloramine treatment and your other reduction goals. A softener addresses the hardness minerals; the utility’s reported level is 354 ppm, with a 230–432 ppm range.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 12, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →
Your homeFind my system →