Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

New Hanover County, North Carolina water quality report

Find My Water System
Showing utility report

CFPUA — Wilmington Water System

2025 annual report; individual sampling dates shown

Results below are for CFPUA — Wilmington Water System. Other water systems in New Hanover County may have different results.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Soft average

50mg/L as CaCO₃

Published annual average

USGS soft range: 0–60 mg/L

About 2.9 gpg; reported range 39–62 mg/L.

TTHM

Below 80 ppb

30.6ppb

Highest LRAA · location B01

Report MCL: 80 ppb

Reported range 1.1–48.6 ppb. Compliance uses locational annual averages.

HAA5

Below 60 ppb

22.7ppb

Highest LRAA · location B08

Report MCL: 60 ppb

Reported range ND–25.7 ppb. Compliance uses locational annual averages.

Chlorine

Below 4 ppm

1.16ppm

Running annual average

Report MRDL: 4 ppm

Reported range .40–2.46 ppm; a disinfectant residual.

PFOA

Compound-specific result

0.03ppt

Reported annual average

Range ND–1.45 ppt; not a total-PFAS measurement.

GenX

Compound-specific result

0.1ppt

Reported annual average

Range ND–1.27 ppt; not a measurement at your tap.

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
50 mg/L · 2.9 gpg average2025 annual utility report
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardness50 mg/L as CaCO₃Published annual average2025View sourceSoft averageAbout 2.9 gpg; reported range 39–62 mg/L.
TTHM30.6 ppbHighest LRAA · location B012025View sourceBelow 80 ppbReported range 1.1–48.6 ppb. Compliance uses locational annual averages.
HAA522.7 ppbHighest LRAA · location B082025View sourceBelow 60 ppbReported range ND–25.7 ppb. Compliance uses locational annual averages.
Chlorine1.16 ppmRunning annual average2025View sourceBelow 4 ppmReported range .40–2.46 ppm; a disinfectant residual.
PFOA0.03 pptReported annual average2025View sourceCompound-specific resultRange ND–1.45 ppt; not a total-PFAS measurement.
GenX0.1 pptReported annual average2025View sourceCompound-specific resultRange ND–1.27 ppt; not a measurement at your tap.
Fluoride0.77 ppmHighest compliance result2025View sourceBelow 4 ppmReported range ND–.77 ppm.
Copper0.22 ppm90th percentile2023View sourceBelow 1.3 ppmNo sites above the action level.
Lead<3 ppb90th percentile2023View sourceBelow reporting limitNo sites above the action level.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. The CFPUA-Wilmington system, including Sweeney and Richardson treatment plants and the former Monterey Heights wells. Wrightsville Beach is a separate system in the same report.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Wilmington and New Hanover County households.

CFPUA’s report includes several water systems. These cards use the Wilmington system only; Wrightsville Beach and private wells require their own results.

A useful local question

Does this report cover every home in New Hanover County?

The measured results on this page come from CFPUA — Wilmington Water System. Check your water bill to confirm your system. If you use another utility or a private well, select that option and use the matching report or a current well test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 20, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →