Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Maricopa County water quality report

Find My Water System
Showing utility report

City of Phoenix

2025 report; sample dates vary

Select this exact provider and supply system. A city, county or ZIP match alone does not confirm the water reaching your home.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Hardness

Hard to very hard

172–302mg/L

2025 distribution-system range. Confirm your incoming hardness to size and set the softener.

USGS: hard >120; very hard >180 mg/L as CaCO₃

Chlorine

Below disinfectant limit

0.84mg/L

Highest running annual average · 2025

4 mg/L MRDL

Fluoride

Below listed limit

0.3–1.1mg/L

Sample range · 2025

4 mg/L MCL

Arsenic

Below limit; 70% of benchmark

7µg/L

Highest annual average · 2025; range ND–8.5

10 µg/L MCL

Total trihalomethanes

Below listed limit

49µg/L

Highest locational running annual average · 2025; range 4–68

80 µg/L MCL

Haloacetic acids

Below listed limit

17µg/L

Highest locational running annual average · 2025; range 0.6–26

60 µg/L MCL

Nitrate (as nitrogen)

Below listed limit

ND–4.5mg/L

Sample range · 2025

10 mg/L MCL

Total chromium

Below listed limit; maximum 87%

ND–87µg/L

Sample range · 2025

100 µg/L MCL

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
172–302 mg/L · Hard to very hard2025
≈12 / 16 gpg zone averages · Very hard zone averages2025
173–288 mg/L · Hard to very hard2025
215–290 mg/L · Very hard2026 report · approximate area levels
237 mg/L average · Very hard average2025
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report ↗

What was measuredReported amountSample year / source dateHow to read it
Hardness172–302 mg/L 2025 distribution-system range. Confirm your incoming hardness to size and set the softener.2025View source ↗Hard to very hard
Chlorine0.84 mg/LHighest running annual average · 20252025View source ↗Below disinfectant limit4 mg/L MRDL
Fluoride0.3–1.1 mg/LSample range · 20252025View source ↗Below listed limit4 mg/L MCL
Arsenic7 µg/LHighest annual average · 2025; range ND–8.52025View source ↗Below limit; 70% of benchmark10 µg/L MCL
Total trihalomethanes49 µg/LHighest locational running annual average · 2025; range 4–682025View source ↗Below listed limit80 µg/L MCL
Haloacetic acids17 µg/LHighest locational running annual average · 2025; range 0.6–262025View source ↗Below listed limit60 µg/L MCL
Nitrate (as nitrogen)ND–4.5 mg/LSample range · 20252025View source ↗Below listed limit10 mg/L MCL
Total chromiumND–87 µg/LSample range · 20252025View source ↗Below listed limit; maximum 87%100 µg/L MCL
Total dissolved solids464–716 mg/LSample range · 20252025View source ↗Range crosses aesthetic guideline500 mg/L secondary guideline
Sodium91–183 mg/LSample range · 20252025View source ↗No high/low rating assignedNo limit listed in report

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation ↗

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →

Next: match my home →

Source water. Source blends and service areas can differ. Read the utility’s source-water description in the original report and confirm the system on your bill.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Five utilities. Separate reports. No countywide average.

This Maricopa County guide covers five named city systems. It does not assign their results to Gilbert, Tempe, Peoria, other utilities or private wells. Hardness and source blends vary by provider and zone. Choose Other / not sure when your system is not listed.

Related city reports

A useful local question

Does this report describe every home in Maricopa County?

This Maricopa County guide covers five named city systems. It does not assign their results to Gilbert, Tempe, Peoria, other utilities or private wells. Hardness and source blends vary by provider and zone. Choose Other / not sure when your system is not listed.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Different name on your water bill?

The systems covered here publish separate reports. Use the official links to confirm your utility and system. If yours is not listed, choose Other / not sure.

Source checks: October 29–November 2, 2026. Layout updated November 4, 2026.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →