Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Union County, North Carolina water quality report

Find My Water System
Showing utility report

Union County Water

2026 report covering 2025; sample dates shown

Results below are for Union County Water. Other water systems in Union County may have different results.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Test at your home

Not published

No system-wide total-hardness result summarized

Confirm incoming hardness before sizing a softener.

Reviewed November 20, 2026View source

TTHM

Below 80 ppb

28.75ppb

Reported value

Report MCL: 80 ppb

Reported range 10–65 ppb. Compliance uses locational annual averages.

HAA5

Below 60 ppb

14.75ppb

Reported value

Report MCL: 60 ppb

Reported range 2–16 ppb. Compliance uses locational annual averages.

Chloramines

Below 4 ppm

2.22ppm

Running annual average

Report MRDL: 4 ppm

Reported range 1–3.7 ppm; a disinfectant residual.

Copper

Below 1.3 ppm

0.22ppm

90th percentile

Report action level: 1.3 ppm

September sampling; no sites above the action level.

September 9, 2025View source

Lead

Below reporting limit

NDppb

90th percentile

Report action level: 15 ppb

September round: no sites above 15 ppb. April’s round had two sites above 15 ppb, up to 109 ppb.

September 9, 2025View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not published for this systemNo total-hardness measurement summarized for this system
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardnessNot published No system-wide total-hardness result summarizedReviewed November 20, 2026View sourceTest at your homeConfirm incoming hardness before sizing a softener.
TTHM28.75 ppbReported value2025View sourceBelow 80 ppbReported range 10–65 ppb. Compliance uses locational annual averages.
HAA514.75 ppbReported value2025View sourceBelow 60 ppbReported range 2–16 ppb. Compliance uses locational annual averages.
Chloramines2.22 ppmRunning annual average2025View sourceBelow 4 ppmReported range 1–3.7 ppm; a disinfectant residual.
Copper0.22 ppm90th percentileSeptember 9, 2025View sourceBelow 1.3 ppmSeptember sampling; no sites above the action level.
LeadND ppb90th percentileSeptember 9, 2025View sourceBelow reporting limitSeptember round: no sites above 15 ppb. April’s round had two sites above 15 ppb, up to 109 ppb.
Copper0.0915 ppm90th percentileApril 28, 2025View sourceBelow 1.3 ppmApril round: no sites above 1.3 ppm.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. Surface water from the Catawba River and Lake Tillery. The report separately includes the Catawba River Water Supply Project’s wholesale results.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Union County Water customers around the Charlotte area.

Monroe and other suppliers have separate reports. Hardness published for a wholesale supplier is not treated here as a measurement of the entire Union County distribution system.

A useful local question

Does this report cover every home in Union County?

The measured results on this page come from Union County Water. Check your water bill to confirm your system. If you use another utility or a private well, select that option and use the matching report or a current well test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 20, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →