Water hardness
Test at your homeNot published
No total-hardness result summarized
Confirm incoming hardness before sizing a softener.
2025 annual report; individual sampling dates shown
Results below are for Johnston County Water — West. Other water systems in Johnston County may differ.
See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.
Not published
No total-hardness result summarized
Confirm incoming hardness before sizing a softener.
57ppb
Reported annual compliance value
Report MCL: 80 ppb
Reported sample range 16–71 ppb; compliance uses annual averages.
41ppb
Reported annual compliance value
Report MCL: 60 ppb
Reported sample range 9–44 ppb; compliance uses annual averages.
2.31ppm
Running annual average
Report MRDL: 4 ppm
Reported range 0–3.82 ppm.
0ppb
90th percentile
Report action level: 15 ppb
Reported zero; later 2024 round had no exceedances. Earlier May round included one 89 ppb sample.
0.1ppm
90th percentile
Report action level: 1.3 ppm
No sites above the action level in this sampling round.
2025 annual report; individual sampling dates shown
Results below are for Johnston County Water — East. Other water systems in Johnston County may differ.
See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.
Not published
No total-hardness result summarized
Confirm incoming hardness before sizing a softener.
69ppb
Reported annual compliance value
Report MCL: 80 ppb
Reported sample range 0–76 ppb; compliance uses annual averages.
39ppb
Reported annual compliance value
Report MCL: 60 ppb
Reported sample range 0–36 ppb; compliance uses annual averages.
1.03ppm
Running annual average
Report MRDL: 4 ppm
Reported range 0.2–2.18 ppm.
0.14ppm
Reported value
Primary MCL: 4 ppm
Single reported sample; not an annual average.
0ppb
90th percentile
Report action level: 15 ppb
Reported zero; no sites above the action level.
Continue with your home details for general filtration guidance. We will not use another utility’s numbers as your result.
Find My Water SystemA city report cannot establish a well’s water quality. Well-water treatment depends on your test results and site conditions.
Explore well-water systemsThe figures below are provider-specific. They are not a countywide average.
| Utility | Hardness | Hardness source |
|---|---|---|
| Not published for this system | No total-hardness measurement summarized for this system | |
| Not published for this system | No total-hardness measurement summarized for this system |
Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.
Open the complete utility report
| What was measured | Reported amount | Sample year / source date | How to read it |
|---|---|---|---|
| Water hardness | Not published No total-hardness result summarized | Reviewed November 21, 2026View source | Test at your homeConfirm incoming hardness before sizing a softener. |
| TTHM | 57 ppbReported annual compliance value | 2025View source | Below 80 ppbReported sample range 16–71 ppb; compliance uses annual averages. |
| HAA5 | 41 ppbReported annual compliance value | 2025View source | Below 60 ppbReported sample range 9–44 ppb; compliance uses annual averages. |
| Chloramines | 2.31 ppmRunning annual average | 2025View source | Below 4 ppmReported range 0–3.82 ppm. |
| Lead | 0 ppb90th percentile | September–October 2024View source | Below 15 ppbReported zero; later 2024 round had no exceedances. Earlier May round included one 89 ppb sample. |
| Copper | 0.1 ppm90th percentile | September–October 2024View source | Below 1.3 ppmNo sites above the action level in this sampling round. |
| Chlorine | 0.83 ppmRunning annual average | 2025View source | Below 4 ppmReported range 0.09–3.45 ppm. |
| Lead | 0 ppb90th percentile | May 14–31, 2024View source | Below 15 ppbOne site exceeded 15 ppb; sample range 0–89 ppb. |
In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.
MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.
PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation
Choose the system size, keep useful existing equipment, and review your filtration goals.
Source water. Neuse River water and purchased supplies from Smithfield, Harnett County and Raleigh, as described in the West system report.
Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.
Open the complete utility report
| What was measured | Reported amount | Sample year / source date | How to read it |
|---|---|---|---|
| Water hardness | Not published No total-hardness result summarized | Reviewed November 21, 2026View source | Test at your homeConfirm incoming hardness before sizing a softener. |
| TTHM | 69 ppbReported annual compliance value | 2025View source | Below 80 ppbReported sample range 0–76 ppb; compliance uses annual averages. |
| HAA5 | 39 ppbReported annual compliance value | 2025View source | Below 60 ppbReported sample range 0–36 ppb; compliance uses annual averages. |
| Chlorine | 1.03 ppmRunning annual average | 2025View source | Below 4 ppmReported range 0.2–2.18 ppm. |
| Fluoride | 0.14 ppmReported value | April 1, 2025View source | Below 4 ppmSingle reported sample; not an annual average. |
| Lead | 0 ppb90th percentile | July 10–13, 2023View source | Below 15 ppbReported zero; no sites above the action level. |
| Copper | 0.1 ppm90th percentile | July 10–13, 2023View source | Below 1.3 ppmNo sites above the action level. |
In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.
MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.
PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation
Choose the system size, keep useful existing equipment, and review your filtration goals.
Source water. The East system’s combination of county-treated water and purchased supplies. The report names Wilson, Sampson County and Wayne-area sanitary districts.
Email delivery is coming soon. Copy the report link to share it now.
More about your local water
Water-quality guidance for Johnston County Water customers.
Select East or West to see the correct system. Chlorine and chloramine results, sampling dates and notices differ between the two reports.
A useful local question
The measured results here come from Johnston County East and West. Match the provider on your water bill. Other utilities and private wells require their own report or water test.
We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.
Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.
Sources reviewed November 21, 2026. Individual sampling dates are shown with each result.
Your water → your home → your system
Choose the system size, keep useful existing equipment, and review your filtration goals.