Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Guilford County, North Carolina water quality report

Find My Water System
Showing utility report

City of Greensboro Water Resources

2025 annual report; individual sampling dates shown

Results below are for City of Greensboro Water Resources. Other water systems in Guilford County may have different results.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Test at your home

Not published

No system-wide total-hardness result summarized

Confirm incoming hardness before sizing a softener.

Reviewed November 20, 2026View source

Chloramines

Below 4 ppm

2.1ppm

Running annual average

Report MRDL: 4 ppm

Reported range .02–3.11 ppm; a disinfectant residual.

HAA5

Below 60 ppb

42ppb

Reported value

Report MCL: 60 ppb

Reported range 6–59 ppb. Compliance uses locational annual averages.

Lead

Below reporting limit

<3ppb

90th percentile

Report action level: 15 ppb

2024 tap sampling; no sites above the action level.

Copper

Below 1.3 ppm

0.18ppm

90th percentile

Report action level: 1.3 ppm

2024 tap sampling; no sites above the action level.

Fluoride

Below 4 ppm

0.10–0.55ppm

Two treatment-plant results

Report MCL: 4 ppm

Reported range 0.10–0.55 ppm.

April 15, 2025View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not published for this systemNo total-hardness measurement summarized for this system
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardnessNot published No system-wide total-hardness result summarizedReviewed November 20, 2026View sourceTest at your homeConfirm incoming hardness before sizing a softener.
Chloramines2.1 ppmRunning annual average2025View sourceBelow 4 ppmReported range .02–3.11 ppm; a disinfectant residual.
HAA542 ppbReported value2025View sourceBelow 60 ppbReported range 6–59 ppb. Compliance uses locational annual averages.
Lead<3 ppb90th percentile2024View sourceBelow reporting limit2024 tap sampling; no sites above the action level.
Copper0.18 ppm90th percentile2024View sourceBelow 1.3 ppm2024 tap sampling; no sites above the action level.
Fluoride0.10–0.55 ppmTwo treatment-plant resultsApril 15, 2025View sourceBelow 4 ppmReported range 0.10–0.55 ppm.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. Greensboro’s reservoir and treatment-plant system, with purchased water identified separately in the city’s report.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Greensboro and Guilford County households.

High Point and other systems have their own reports. Greensboro’s two treatment plants and purchased supplies should not be treated as one measurement for all of Guilford County.

A useful local question

Does this report cover every home in Guilford County?

The measured results on this page come from City of Greensboro Water Resources. Check your water bill to confirm your system. If you use another utility or a private well, select that option and use the matching report or a current well test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 20, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →