Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Cumberland County, North Carolina water quality report

Find My Water System
Showing utility report

Fayetteville Public Works Commission

2025 annual report; individual sampling dates shown

Results below are for Fayetteville Public Works Commission. Other water systems in Cumberland County may have different results.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Test at your home

Not published

No system-wide total-hardness result summarized

Confirm incoming hardness before sizing a softener.

Reviewed November 20, 2026View source

TTHM

Below 80 ppb

45ppb

Highest listed site LRAA · B03

Report MCL: 80 ppb

Reported range 23–50 at B03 ppb. Compliance uses locational annual averages.

HAA5

Below 60 ppb

27ppb

Highest listed site LRAA · B06

Report MCL: 60 ppb

Reported range 18–38 at B06 ppb. Compliance uses locational annual averages.

Chloramines

Below 4 ppm

2.91ppm

Running annual average

Report MRDL: 4 ppm

Reported range 1.91–3.42 ppm; a disinfectant residual.

Fluoride

Below 4 ppm

0.6ppm

Reported value

Report MCL: 4 ppm

Reported range .29–.88 ppm.

January 2025View source

Sodium

No federal MCL

26.6ppm

Reported sample

No federal primary limit

Sodium is a separate measurement from hardness.

January 2025View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not published for this systemNo total-hardness measurement summarized for this system
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardnessNot published No system-wide total-hardness result summarizedReviewed November 20, 2026View sourceTest at your homeConfirm incoming hardness before sizing a softener.
TTHM45 ppbHighest listed site LRAA · B032025View sourceBelow 80 ppbReported range 23–50 at B03 ppb. Compliance uses locational annual averages.
HAA527 ppbHighest listed site LRAA · B062025View sourceBelow 60 ppbReported range 18–38 at B06 ppb. Compliance uses locational annual averages.
Chloramines2.91 ppmRunning annual average2025View sourceBelow 4 ppmReported range 1.91–3.42 ppm; a disinfectant residual.
Fluoride0.6 ppmReported valueJanuary 2025View sourceBelow 4 ppmReported range .29–.88 ppm.
Sodium26.6 ppmReported sampleJanuary 2025View sourceNo federal MCLSodium is a separate measurement from hardness.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. PWC’s treated public supply; chloramine is its main distribution disinfectant, with a periodic change to chlorine.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Fayetteville and Cumberland County households.

PWC’s report separates overall disinfection-byproduct results from monitoring-site annual averages. The cards use the highest listed location averages for those two measures.

A useful local question

Does this report cover every home in Cumberland County?

The measured results on this page come from Fayetteville Public Works Commission. Check your water bill to confirm your system. If you use another utility or a private well, select that option and use the matching report or a current well test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 20, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →