Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Onslow County, North Carolina water quality report

Find My Water System
Showing utility report

ONWASA — Main System

2025 annual report; individual sampling dates shown

Results below are for ONWASA — Main System. Other water systems in Onslow County may differ.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Test at your home

Not published

No total-hardness result summarized

Confirm incoming hardness before sizing a softener.

Reviewed November 21, 2026View source

TTHM

Below 80 ppb

63ppb

Reported annual compliance value

Report MCL: 80 ppb

Reported sample range 23.5–74.8 ppb; compliance uses annual averages.

HAA5

Below 60 ppb

53ppb

Reported annual compliance value

Report MCL: 60 ppb

Reported sample range 10.3–53.5 ppb; compliance uses annual averages.

Chlorine

Below 4 ppm

1.76ppm

Highest reported running annual average

Report MRDL: 4 ppm

Reported range 1.63–1.89 ppm.

Fluoride

Above 2 ppm secondary level

3.54ppm

Highest value in main-system table

Secondary: 2 ppm · Primary: 4 ppm

Range 0.568–3.54 ppm. The notice text differs; confirm current guidance with ONWASA.

Lead

Below 15 ppb

0ppb

90th percentile

Report action level: 15 ppb

Reported zero; range 0–8 ppb and no sites above the action level.

June–August 2025View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not published for this systemNo total-hardness measurement summarized for this system
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardnessNot published No total-hardness result summarizedReviewed November 21, 2026View sourceTest at your homeConfirm incoming hardness before sizing a softener.
TTHM63 ppbReported annual compliance value2025View sourceBelow 80 ppbReported sample range 23.5–74.8 ppb; compliance uses annual averages.
HAA553 ppbReported annual compliance value2025View sourceBelow 60 ppbReported sample range 10.3–53.5 ppb; compliance uses annual averages.
Chlorine1.76 ppmHighest reported running annual average2025View sourceBelow 4 ppmReported range 1.63–1.89 ppm.
Fluoride3.54 ppmHighest value in main-system table2025View sourceAbove 2 ppm secondary levelRange 0.568–3.54 ppm. The notice text differs; confirm current guidance with ONWASA.
Lead0 ppb90th percentileJune–August 2025View sourceBelow 15 ppbReported zero; range 0–8 ppb and no sites above the action level.
Copper0.2 ppm90th percentileJune–August 2025View sourceBelow 1.3 ppmNo sites above the action level; range 0–0.4 ppm.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. The main ONWASA groundwater system identified as NC 04-67-035. The report also includes other systems whose results are separate.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Onslow County households served by ONWASA.

Use the main-system results only for the matching ONWASA service area. Jacksonville, military systems and Old Settlers Beach have separate data. Review ONWASA’s fluoride notice and current guidance.

A useful local question

Does this report cover every home in Onslow County?

The measured results here come from ONWASA — Main System. Match the provider on your water bill. Other utilities and private wells require their own report or water test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 21, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →