Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Buncombe County, North Carolina water quality report

Find My Water System
Showing utility report

City of Asheville Water Resources

2025 annual report; individual sampling dates shown

Results below are for City of Asheville Water Resources. Other water systems in Buncombe County may differ.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Soft range

5.52mg/L as CaCO₃

Annual average

USGS soft range: 0–60 mg/L

About 0.3 gpg. No numerical range is supplied for this result.

TTHM

Below 80 ppb

68ppb

Highest LRAA · B01

Report MCL: 80 ppb

Reported sample range 8–63 ppb; compliance uses annual averages.

HAA5

Below 60 ppb

52ppb

Highest LRAA · B07

Report MCL: 60 ppb

Reported sample range 7–34 ppb; compliance uses annual averages.

Chlorine

Below 4 ppm

1.21ppm

Running annual average

Report MRDL: 4 ppm

Reported range 0.32–1.88 ppm.

Lead

Below 15 ppb

<3ppb

90th percentile

Report action level: 15 ppb

July–December round; no sites above the action level.

July–December 2025View source

Copper

Below 1.3 ppm

0.058ppm

90th percentile

Report action level: 1.3 ppm

July–December round; no sites above the action level.

July–December 2025View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
5.52 mg/L · 0.3 gpg · annual average2025
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardness5.52 mg/L as CaCO₃Annual average2025View sourceSoft rangeAbout 0.3 gpg. No numerical range is supplied for this result.
TTHM68 ppbHighest LRAA · B012025View sourceBelow 80 ppbReported sample range 8–63 ppb; compliance uses annual averages.
HAA552 ppbHighest LRAA · B072025View sourceBelow 60 ppbReported sample range 7–34 ppb; compliance uses annual averages.
Chlorine1.21 ppmRunning annual average2025View sourceBelow 4 ppmReported range 0.32–1.88 ppm.
Lead<3 ppb90th percentileJuly–December 2025View sourceBelow 15 ppbJuly–December round; no sites above the action level.
Copper0.058 ppm90th percentileJuly–December 2025View sourceBelow 1.3 ppmJuly–December round; no sites above the action level.
Lead<3 ppb90th percentileJanuary–June 2025View sourceBelow 15 ppbEarlier round; no sites above the action level.
Copper0.056 ppm90th percentileJanuary–June 2025View sourceBelow 1.3 ppmEarlier round; no sites above the action level.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. The North Fork and Bee Tree reservoirs and the Mills River supply. These are Asheville system results, not private-well measurements.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Asheville and Buncombe County households.

Asheville’s annual-average hardness is soft. Black Mountain, Weaverville and other systems have separate reports; match the provider before using these measurements.

A useful local question

Does this report cover every home in Buncombe County?

The measured results here come from City of Asheville Water Resources. Match the provider on your water bill. Other utilities and private wells require their own report or water test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 21, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →