Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Durham County, North Carolina water quality report

Find My Water System
Showing utility report

City of Durham Water Management

2025 annual report; individual sampling dates shown

Results below are for City of Durham Water Management. Other water systems in Durham County may have different results.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Test at your home

Not published

No system-wide total-hardness result summarized

Confirm incoming hardness before sizing a softener.

Reviewed November 20, 2026View source

TTHM

Below 80 ppb

56ppb

Highest locational running annual average

Report MCL: 80 ppb

Reported range 26–54 ppb. Compliance uses locational annual averages.

HAA5

Below 60 ppb

49ppb

Highest locational running annual average

Report MCL: 60 ppb

Reported range 13–48 ppb. Compliance uses locational annual averages.

Chloramines

Below 4 ppm

1.5ppm

Running annual average

Report MRDL: 4 ppm

Reported range .01–3.0 ppm; a disinfectant residual.

Fluoride

Below 4 ppm

0.7ppm

Reported monthly-monitoring value

Report MCL: 4 ppm

Reported range .67–.77 ppm.

Copper

Below 1.3 ppm

0.105ppm

90th percentile

Report action level: 1.3 ppm

No sites above the action level; range <0.05–0.284 ppm.

June–September 2025View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not published for this systemNo total-hardness measurement summarized for this system
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardnessNot published No system-wide total-hardness result summarizedReviewed November 20, 2026View sourceTest at your homeConfirm incoming hardness before sizing a softener.
TTHM56 ppbHighest locational running annual average2025View sourceBelow 80 ppbReported range 26–54 ppb. Compliance uses locational annual averages.
HAA549 ppbHighest locational running annual average2025View sourceBelow 60 ppbReported range 13–48 ppb. Compliance uses locational annual averages.
Chloramines1.5 ppmRunning annual average2025View sourceBelow 4 ppmReported range .01–3.0 ppm; a disinfectant residual.
Fluoride0.7 ppmReported monthly-monitoring value2025View sourceBelow 4 ppmReported range .67–.77 ppm.
Copper0.105 ppm90th percentileJune–September 2025View sourceBelow 1.3 ppmNo sites above the action level; range <0.05–0.284 ppm.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. Surface water from Lake Michie and Little River Reservoir.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Durham and surrounding Durham County neighborhoods.

The city’s water sources are separate from private wells. A current hardness test at the house is the useful next step when scale or spotting is a concern.

A useful local question

Does this report cover every home in Durham County?

The measured results on this page come from City of Durham Water Management. Check your water bill to confirm your system. If you use another utility or a private well, select that option and use the matching report or a current well test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 20, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →