Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Lincoln County, Nevada water quality report

Find My Water System
Showing utility report

Caliente Public Utilities

Historical 2019 report covering 2018

This historical source is for Caliente Public Utilities (NV0000013), not Pioche, Panaca, Alamo or every Lincoln County home.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Test before sizing

Not published

No total-hardness value summarized

Use a current tap test to set a softener; TDS does not measure hardness.

Historical 2019 report covering 2018View source

Arsenic

Below report’s 10 ppb MCL

7ppb

Highest result; range 5.3–7

June 8, 2016View source

Nitrate

Below report’s 10 ppm MCL

0.69ppm

Highest result; range 0.48–0.69

August 8, 2018View source

Fluoride

Below report’s 2 ppm MCL

1.4ppm

Highest result; range 0.99–1.4

August 8, 2018View source

Total dissolved solids

Below report’s 1,000 mg/L secondary standard

280mg/L

Reported result

Historical value; not a hardness reading.

August 8, 2018View source

Lead

Below report’s 15 ppb action level

4ppb

90th percentile; range 1–11

No sampled sites above the action level in this table.

2016–2018View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not publishedNo total-hardness measurement in the reviewed source
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardnessNot published No total-hardness value summarizedHistorical 2019 report covering 2018View sourceTest before sizingUse a current tap test to set a softener; TDS does not measure hardness.
Arsenic7 ppbHighest result; range 5.3–7June 8, 2016View sourceBelow report’s 10 ppb MCL
Nitrate0.69 ppmHighest result; range 0.48–0.69August 8, 2018View sourceBelow report’s 10 ppm MCL
Fluoride1.4 ppmHighest result; range 0.99–1.4August 8, 2018View sourceBelow report’s 2 ppm MCL
Total dissolved solids280 mg/LReported resultAugust 8, 2018View sourceBelow report’s 1,000 mg/L secondary standardHistorical value; not a hardness reading.
Lead4 ppb90th percentile; range 1–112016–2018View sourceBelow report’s 15 ppb action levelNo sampled sites above the action level in this table.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. Groundwater wells identified in the Caliente report.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Lincoln County communities have separate supplies. Confirm your provider and obtain its current report before selecting treatment; test private wells separately.

For Lincoln County, size equipment around measured tap-water hardness, household use and the substances you want to reduce. A whole-home filter and a softener perform different jobs. Arrange installation with your licensed plumber.

A useful local question

Do I need a filter and a softener in Lincoln County?

We suggest whole-home filtration and a water softener for scale concerns. Confirm incoming hardness before sizing, and match the filter’s documented performance to your treatment goals.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 19, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →