Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Iredell County, North Carolina water quality report

Find My Water System
Showing utility report

City of Statesville

2025 annual report; individual sampling dates shown

Results below are for City of Statesville. Other water systems in Iredell County may differ.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Test at your home

Not published

No total-hardness result summarized

Confirm incoming hardness before sizing a softener.

Reviewed November 21, 2026View source

TTHM

Below 80 ppb

52ppb

Highest listed LRAA · B01

Report MCL: 80 ppb

Reported sample range 33–74 at B01 ppb; compliance uses annual averages.

HAA5

Below 60 ppb

33ppb

Highest listed LRAA · B02

Report MCL: 60 ppb

Reported sample range 25–43 at B02 ppb; compliance uses annual averages.

Chlorine

Below 4 ppm

1.38ppm

Running annual average

Report MRDL: 4 ppm

Reported range 0.20–2.17 ppm.

Fluoride

Below 4 ppm

0.488ppm

Reported value

Primary MCL: 4 ppm

Reported compliance sample.

February 6, 2025View source

Lead

Below 15 ppb

NDppb

90th percentile

Report action level: 15 ppb

No sites above the action level.

June 26, 2023View source

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not published for this systemNo total-hardness measurement summarized for this system
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardnessNot published No total-hardness result summarizedReviewed November 21, 2026View sourceTest at your homeConfirm incoming hardness before sizing a softener.
TTHM52 ppbHighest listed LRAA · B012025View sourceBelow 80 ppbReported sample range 33–74 at B01 ppb; compliance uses annual averages.
HAA533 ppbHighest listed LRAA · B022025View sourceBelow 60 ppbReported sample range 25–43 at B02 ppb; compliance uses annual averages.
Chlorine1.38 ppmRunning annual average2025View sourceBelow 4 ppmReported range 0.20–2.17 ppm.
Fluoride0.488 ppmReported valueFebruary 6, 2025View sourceBelow 4 ppmReported compliance sample.
LeadND ppb90th percentileJune 26, 2023View sourceBelow 15 ppbNo sites above the action level.
Copper0.264 ppm90th percentileJune 26, 2023View sourceBelow 1.3 ppmNo sites above the action level; range 0–0.60 ppm.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. The City of Statesville municipal supply described in its annual report. Other Iredell County systems publish separate results.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Statesville and Iredell County households.

These measurements apply to Statesville. Mooresville and other Iredell County providers have separate reports; a county address alone does not identify the supplier.

A useful local question

Does this report cover every home in Iredell County?

The measured results here come from City of Statesville. Match the provider on your water bill. Other utilities and private wells require their own report or water test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 21, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →