Your local water, explained
League City data is a starting point—not a county average.
This hub covers League City's municipal report. Its hardness figure is specifically a supplier entry-point measurement; it should not be presented as a test of every League City or Galveston County home.
Your water → your home → your system
Your water
The report follows your water provider—not your ZIP code or county boundary.
Only the listed water system is summarized here. Choose “Other / not sure” if your bill shows a different supplier.
Confirm the provider on your bill, or choose “Other / not sure” to continue without a matched report.
Utility data is a starting point. It is not a test of your tap or a live advisory. Sources checked October 23, 2026
The figures below are provider-specific. They are not a countywide average.
| Utility | Hardness | Hardness source |
|---|---|---|
| 124 mg/L as CaCO₃ · Hard — entry-point result | 2025 |
2026 report with 2025 data; individual rows keep their dates
Municipal utility results; supplier EP002 hardness is separately labelled. Galveston County is not one water system.
See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.
124mg/L as CaCO₃
SEWPP supplier/entry point EP002 only in 2026 report; min/avg/max124
Do not label citywide tap hardness. Report has multiple supplies/groundwater wells. Verify home's current blend.
2025
View source ↗2.39 mg/L
Average; range 0.50–3.63
MRDL 4 mg/L
2025
View source ↗46.9 µg/L
Highest level reported; range 22.9–46.9; source does not identify this column as LRAA
MCL 80 µg/L
2025
View source ↗34 µg/L
Highest level reported; range 14.1–34
MCL 60 µg/L
2025
View source ↗0.20 mg/L
Highest municipal value; distinct from supplier0.21
MCL 4 mg/L
2025-03-17
View source ↗3 µg/L
90th percentile; range 0–58; one site above action level
Action level 15 µg/L
2022–2024
View source ↗Not verified
No compound-specific result assessed in this summary
This does not establish whether PFAS are present or absent. Check compound-specific testing before choosing treatment.
2025 report review
View source ↗0.89 mg/L
Highest municipal value; range 0.08–0.89
MCL 10 mg/L
2025-03-17
View source ↗Selected useful results—not a replacement for the utility’s complete report. Older measurements retain their original year.
Open the complete utility report ↗
| What was measured | Reported amount | Sample year / source date | How to read it |
|---|---|---|---|
| Hardness | 124 mg/L as CaCO₃SEWPP supplier/entry point EP002 only in 2026 report; min/avg/max124 | 2025View source ↗ | Hard — entry-point resultDo not label citywide tap hardness. Report has multiple supplies/groundwater wells. Verify home's current blend. |
| Chloramine | 2.39 mg/L Average; range 0.50–3.63 | 2025View source ↗ | Average below MRDL · MRDL 4 mg/L |
| TTHM | 46.9 µg/L Highest level reported; range 22.9–46.9; source does not identify this column as LRAA | 2025View source ↗ | Reported maximum below MCL; compliance uses required averaging · MCL 80 µg/L |
| HAA5 | 34 µg/L Highest level reported; range 14.1–34 | 2025View source ↗ | Reported maximum below MCL · MCL 60 µg/L |
| Fluoride | 0.20 mg/L Highest municipal value; distinct from supplier0.21 | 2025-03-17View source ↗ | Below MCL · MCL 4 mg/L |
| Nitrate | 0.89 mg/L Highest municipal value; range 0.08–0.89 | 2025-03-17View source ↗ | Below MCL · MCL 10 mg/L |
| Lead | 3 µg/L 90th percentile; range 0–58; one site above action level | 2022–2024View source ↗ | 90th percentile below action level; one individual site exceeded · Action level 15 µg/LA system sampling percentile is not a measurement of your faucet. |
| Copper | 0.464 mg/L 90th percentile; range 0.0033–1.08 | 2022–2024View source ↗ | 90th percentile below action level · Action level 1.3 mg/LA system sampling percentile is not a measurement of your faucet. |
| PFAS | Not verified No compound-specific result assessed in this summary | 2025 report reviewView source ↗ | Cannot assess high or lowThis does not establish whether PFAS are present or absent. Check compound-specific testing before choosing treatment. |
ppm ≈ mg/L; ppb ≈ µg/L; ppt ≈ ng/L in drinking water. Hardness in gpg = mg/L as CaCO₃ ÷ 17.1. ND means not detected at the method’s reporting limit—not zero.
MCL is a maximum contaminant level. MRDL is a disinfectant limit. Lead/copper action levels use system sampling percentiles and are not a safe-tap threshold. TTHM/HAA5 compliance uses locational annual averages.
PFOA/PFOS comparisons use EPA’s 4 ppt values. Historical detections are not a present compliance finding; EPA assesses compliance using running annual averages. Rule implementation is being reviewed. EPA PFAS benchmarks and implementation ↗
Choose the system size, keep useful existing equipment, and review your filtration goals.
Source water. Purchased surface water from Gulf Coast Water Authority (Brazos River) and Houston (Trinity River), with groundwater wells also listed.
Continue with your home details for general filtration guidance. We will not use another utility’s numbers as your result.
Find My Water System →A city report cannot establish a well’s water quality. Well-water treatment depends on your test results and site conditions.
Explore well-water systems →Email delivery is coming soon. Copy the report link to share it now.
More about your local water
League City's report includes purchased surface water and groundwater supplies. Other Galveston County cities and districts have separate reports. Confirm the retail provider and current incoming hardness before selecting softener settings.
A useful local question
No. It is the 2025 measurement for League City's SEWPP supplier entry point EP002. It is classified as hard, but the home's actual supply blend and hardness should be confirmed.
We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.
Sources checked October 23, 2026
Your water → your home → your system
Choose the system size, keep useful existing equipment, and review your filtration goals.