Free U.S. shipping on every product · No minimum
Engineered & assembled in the USAStraightforward licensed-plumber installationCrystal Quest · Since 1994
  1. 1Your water
  2. 2Your home
  3. 3Your system

Pitt County, North Carolina water quality report

Find My Water System
Showing utility report

Greenville Utilities Commission

2026 report covering 2025; individual sample dates shown

Results below are for Greenville Utilities Commission. Other water systems in Pitt County may differ.

Your water at a glance

See the amount, the comparison and what it means. “Below” refers to the stated benchmark, not zero risk.

Water hardness

Test at your home

Not published

No total-hardness result summarized

Confirm incoming hardness before sizing a softener.

Reviewed November 21, 2026View source

TTHM

Below 80 ppb

30ppb

Highest LRAA

Report MCL: 80 ppb

Reported sample range 10–40 ppb; compliance uses annual averages.

HAA5

Below 60 ppb

30ppb

Highest LRAA

Report MCL: 60 ppb

Reported sample range 12–30 ppb; compliance uses annual averages.

Chloramines

Below 4 ppm

2.75ppm

Reported system average

Report MRDL: 4 ppm

Reported range 1.2–4.4 ppm.

Fluoride

Below 4 ppm

0.68ppm

Reported value

Primary MCL: 4 ppm

Highest detected value listed in the 2026 report covering 2025.

Lead

Below 15 ppb

0ppb

90th percentile

Report action level: 15 ppb

Reported zero at the 90th percentile; range 0–3 ppb, no sites above the action level.

Water hardness by provider

The figures below are provider-specific. They are not a countywide average.

UtilityHardnessHardness source
Not published for this systemNo total-hardness measurement summarized for this system
View Full Water ReportOpen the measured results, dates, comparisons and original utility report.

The numbers behind your report

Selected results with the original sampling dates and measurement basis. Open the utility report for every parameter, notice and footnote.

Open the complete utility report

What was measuredReported amountSample year / source dateHow to read it
Water hardnessNot published No total-hardness result summarizedReviewed November 21, 2026View sourceTest at your homeConfirm incoming hardness before sizing a softener.
TTHM30 ppbHighest LRAA2025View sourceBelow 80 ppbReported sample range 10–40 ppb; compliance uses annual averages.
HAA530 ppbHighest LRAA2025View sourceBelow 60 ppbReported sample range 12–30 ppb; compliance uses annual averages.
Chloramines2.75 ppmReported system average2025View sourceBelow 4 ppmReported range 1.2–4.4 ppm.
Fluoride0.68 ppmReported value2025View sourceBelow 4 ppmHighest detected value listed in the 2026 report covering 2025.
Lead0 ppb90th percentile2024View sourceBelow 15 ppbReported zero at the 90th percentile; range 0–3 ppb, no sites above the action level.
Chlorine2.42 ppmReported system average2025View sourceBelow 4 ppmReported range 0.9–3.9 ppm.
Copper0.2 ppm90th percentile2024View sourceBelow 1.3 ppmNo sites above the action level.

In drinking water, ppm ≈ mg/L, ppb ≈ µg/L and ppt ≈ ng/L. Calculated hardness in grains per US gallon (gpg) = mg/L as CaCO₃ ÷ 17.118, rounded to one decimal. ND means below the reporting limit, not zero.

MCL is an enforceable contaminant limit; MRDL is a disinfectant limit. A secondary guideline concerns aesthetics. TTHM/HAA5 compliance uses locational running annual averages; read the utility’s notices as well as individual results.

PFAS results are compound-specific. Source monitoring, entry-point samples and tap tests are different. A detected result does not identify every PFAS compound or establish the level at your home. Read the original report for context and current utility notices. EPA PFAS benchmarks and implementation

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System

Next: match my home

Source water. The Tar River, supplemented by three deep wells. Bethel has a separate water-quality report.

Email this report

Email delivery is coming soon. Copy the report link to share it now.

More about your local water

What this means for your home

Water-quality guidance for Greenville and Pitt County households.

These results are for Greenville Utilities’ main system. Bethel and other Pitt County suppliers should be matched to their own reports.

A useful local question

Does this report cover every home in Pitt County?

The measured results here come from Greenville Utilities Commission. Match the provider on your water bill. Other utilities and private wells require their own report or water test.

Sources and methodology

We keep each utility’s results separate, show the reported sample year, and distinguish averages, maxima and tap-sampling percentiles. Hardness classifications use USGS ranges. Missing data stays unknown.

Official utility reports

Confirm the exact system on your water bill. Choose Other / not sure when your supplier is not summarized here.

Sources reviewed November 21, 2026. Individual sampling dates are shown with each result.

Your water → your home → your system

Turn your report into a plan for your home.

Choose the system size, keep useful existing equipment, and review your filtration goals.

Find My Water System →