Water hardness
200mg/L as CaCO₃
≈ 11.7 grains per gallon
MyTapWater’s regional estimate. It is not a measurement of this utility’s finished water or your home’s water; treatment can change hardness.
Undated regional estimate
View source ↗- 1Your water
- 2Your home
- 3Your system
LOCAL WATER. CLEAR ANSWERS.
West Palm Beach water quality report
Understand your water. Find the right system for your home.
Start with the provider on your bill. Review the available local and Palm Beach County reports, then match a filtration system to your West Palm Beach home.
Find My Water System
Next: match your home and see your price.
Next: your homeFind my system →
START HERE
Who supplies your water?
Choose the name on your water bill. A West Palm Beach address alone does not identify your water provider.
Not listed or not sure? Choose the matching option below.
This West Palm Beach guide uses the named utility records from our county reports. The provider name, dates and source on each result show which system it describes. City boundaries alone do not identify your supplier.
City of West Palm Beach · local utility source ↗These are published utility records and clearly labeled regional estimates—not a test of the water at your tap. Dates and sources stay attached to each result.
REPORT HIGHLIGHTS FOR
Palm Beach County Water Utilities
2014-09-23 – 2025-08-08
YOUR WATER AT A GLANCE
What stands out—and what it means.
The label tells you how each amount compares. Missing information stays clearly marked.
Very hard · regional estimate
Disinfectant residual
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
2014-09-23 – 2025-08-08
View source ↗PFAS monitoring
9compounds detected in listed monitoring
A detection alone does not tell you whether an amount is high.
Open the full report for each compound, amount and sample date. Historical detections do not establish today’s concentration or a current violation.
2024-11-06 – 2025-08-08
View source ↗Fluoride
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
2014-09-23 – 2025-08-08
View source ↗Disinfection byproducts
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
2014-09-23 – 2025-08-08
View source ↗Lead & copper
1.4ppb lead · 90th percentile
Report comparison: 15 ppb lead action level.
A 90th-percentile result is not your tap result or the highest sample. Below an action level does not mean zero risk; lead’s health goal is zero.
2023-01-01 – 2023-12-01
View source ↗REPORT HIGHLIGHTS FOR
Another provider / I’m not sure
Provider-specific results not selected
YOUR WATER AT A GLANCE
What stands out—and what it means.
The label tells you how each amount compares. Missing information stays clearly marked.
Water hardness
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
Disinfectant residual
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
PFAS monitoring
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
Fluoride
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
Disinfection byproducts
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
Lead & copper
Not available
An amount has not been summarized for this provider.
This does not mean zero or prove that the substance is absent. Check the provider’s full report for the relevant year.
REPORT HIGHLIGHTS FOR
My home uses a private well
A utility report does not describe a private well
Your well needs its own water test.
County utility results cannot tell us what is in your well. Use current laboratory results to choose treatment for your water and size the equipment for your home.
Find My Water System →Explore well-water systemsThese labels compare a reported result with its stated benchmark. They are not a blanket safety rating. Health goals, compliance limits, action levels and reporting thresholds mean different things.
Coming soon
Ready? Continue to your home →
THE DETAILS BEHIND THE HIGHLIGHTS
Full West Palm Beach water report
Explore the available local reports below. Each table names its supplier and dates; results from different providers are not interchangeable. The provider selector changes your highlights, while this section keeps the county’s source tables together.
Local water results & official sources
Results are specific to the named water system and testing period. Regional hardness estimates are labeled separately. Missing data is not a non-detection. Check your utility’s latest report and current notices.
ppm = mg/L; ppb = µg/L; ppt = ng/L. ND means below detection, not zero. MCL and MRDL are regulatory benchmarks reported in the source; action levels trigger system action. Annual averages, individual samples and household-tap percentiles are different measures. Compare like with like.
Selected provider records
View full MyTapWater report A closer look at your local water
These results describe Palm Beach County Water Utilities (FL4504393), not every home or water system in Palm Beach County. Match this system to your water bill before using the results.
Source record: PALM BEACH COUNTY WATER UTILITIES · Selected test records: 2014-09-23 – 2025-08-08
How to read these results
Results come from different testing periods. A detection is not, by itself, a finding that water is unsafe. “Not detected” means below the test’s reporting level; it does not mean zero. Missing results mean we have not verified that data here.
PFAS monitoring9 of 29 tested PFAS compounds detected
The table shows each compound’s highest reported result and latest listed test date. Those may come from different samples. Results are in parts per trillion (ppt).
| Substance | Highest reported result | Latest listed test | Detected samples |
|---|---|---|---|
| PFOS | 20 ppt | 4 | |
| PFOA | 9 ppt | 4 | |
| 6:2 FTS | 13 ppt | 1 | |
| PFPeA | 7.7 ppt | 4 | |
| PFHxA | 6.5 ppt | 4 | |
| PFHxS | 6.4 ppt | 4 | |
| PFBS | 6.1 ppt | 4 | |
| PFBA | 5 ppt | 1 | |
| PFHpA | 3.1 ppt | 2 |
Lithium monitoringNot detected
MyTapWater reports lithium was tested and not detected. Selected lithium sample dates: 2024-11-06 – 2025-05-12
More tested substances12 selected entries
Selected historical tests, with their original dates. “Detected” means at least one positive result in the listed period. “Below reporting level” means all retrieved samples for that entry were below the reporting level. These older tests do not describe today’s water at your tap.
| Substance | Reported result | Sampling period |
|---|---|---|
| chlorate | Detected | – |
| chromium | Detected | – |
| chromium-6 | Detected | – |
| molybdenum | Detected | – |
| strontium | Detected | – |
| vanadium | Detected | – |
| chloromethane | Detected | – |
| HCFC-22 | Detected | – |
| cobalt | Below reporting level | – |
| 1,3-butadiene | Below reporting level | – |
| bromomethane | Below reporting level | – |
| Halon 1011 | Below reporting level | – |
This is a selection of results from MyTapWater, which compiles public water-system records. Open the source for the complete tables, methods and reporting limits. Check your utility’s latest report and current notices for updates. Source
A list of tested substances is not a list of what a filter removes. Choose a system using its verified contaminant-reduction specifications and your water source. A softener addresses hardness. Use the published hardness for your provider or a home test to choose softening for scale control.
Official utility reports
Water quality and annual reports
Use this source only if the provider and water system match your bill. Other suppliers and private wells need their own report or test.
Open official sourceMore about your local water
When you open the report, look for these sections. These are reading prompts, not a list of substances detected in your home.
Disinfection and byproducts
Look for the disinfectant used and any reported chlorine or chloramine residuals, total trihalomethanes (TTHM) and haloacetic acids (HAA5). Keep sample dates and the report’s units with each result.
Metals and minerals
Look for lead and copper tap-sampling results, and any reported arsenic, nitrate, sodium or other minerals. A tap-sampling percentile describes a group of sampled homes, not the result at your own faucet.
PFAS and additional monitoring
Some utilities publish PFAS monitoring separately. Check the sample year and detection or reporting limits. “Not detected” means below a stated limit, not a measured zero.
Hardness and home testing
Hardness may appear in a separate utility FAQ or water chemistry sheet. Use a finished-water figure for your system, then confirm your incoming water before selecting softening for scale control.
Common questions
Which water report applies to my Palm Beach County home?
The local sources below include Palm Beach County Water Utilities. This is a starting list, not a map of every utility service area in Palm Beach County. If a different supplier appears on your bill, request that supplier’s report.
Where do I get the full water report?
Check the utility name and water system on your bill, then use the matching official link above. If your provider is not listed, ask it for its consumer confidence report. A ZIP code or county name alone cannot identify your water system.
Does this report test my home?
No. Utility reports describe particular systems and sample periods. Plumbing, service lines and treatment already in a home can change the result at the tap.
What if my home uses a private well?
A public utility report does not describe a private well. Use a test from your own well and discuss the results with your local health department before choosing treatment.
Will one whole-home filter remove everything listed?
No. Select equipment by its specific tested or certified reduction claims and rated flow. A long contaminant list is not evidence that a particular system removes every item.
Sources & methodology
No result rows match that search. Try another substance or clear your search.
A quick guide to the numbers
- ppm, ppb and ppt
- Parts per million, billion and trillion. Compare quantities only after matching their units.
- Not detected / below reporting level
- The test did not report an amount above its reporting threshold. It does not establish a concentration of zero.
- Limits, action levels and goals
- A compliance limit is not a health goal. Lead and copper use system action levels, while a reporting limit describes what the test can report.
Turn the report into a starting point.
Next, match the equipment to your home and water source.
A LITTLE MORE CONTEXT
More about your local water
For West Palm Beach, start with the named provider and source dates above. Where a separate city dataset is not available, this guide uses Palm Beach County reference records. Those records describe the listed utility, not every home in the city.
How hard is the water?
USGS classifies 0–60 mg/L as soft, 61–120 as moderately hard, 121–180 as hard and above 180 as very hard. These describe mineral content, not a health-based limit. A regional map cannot replace a home hardness test.
USGS hardness classifications and limitationsFilter and softener: different jobs
Filtration can address taste, odor, sediment and specific substances when the treatment is designed for them. A softener reduces calcium and magnesium. Your water source, actual hardness and household flow needs guide the combination.
Compare filters and softenersWhat this report cannot tell you
A county or utility report does not test your plumbing or private well. It also cannot prove that a particular filter removes every substance shown. Check the exact system’s treatment stages and verified claims for your goal.
What a whole-house filter can addressWhich report applies to a home in West Palm Beach?
A city name, mailing address or ZIP code alone does not establish your water supplier. Municipal systems, county utilities and private wells can serve different addresses in the same area.
Match the system to your home.
Bathroom count and simultaneous water use help size the filter. Your plumber checks the main water line, installation space and drain access. Condos and homes with shared plumbing may need building approval or a different installation.
For a private well, use a current well-water test to choose treatment. Public utility reports do not measure your well.
3. Explore your city
Explore more local reports
Choose a community for local context and the relevant utility reports.
Boca Raton
Water reports, hardness guidance and a starting point for your home.
View water report ↗Boynton Beach
Water reports, hardness guidance and a starting point for your home.
View water report ↗Delray Beach
Water reports, hardness guidance and a starting point for your home.
View water report ↗Golf
Water reports, hardness guidance and a starting point for your home.
View water report ↗Greenacres
Water reports, hardness guidance and a starting point for your home.
View water report ↗Gulf Stream
Water reports, hardness guidance and a starting point for your home.
View water report ↗FROM REPORT TO BETTER WATER
A clear next step for your home.
Use the local report as a starting point, then choose the right system size and treatment options.
- 1
Confirm your water source
Match the supplier on your bill. For a private well, use current test results.
- 2
Find your system
Tell us the home details needed for sizing and whether you want dedicated fluoride treatment.
- 3
Have your plumber install it
Hire and pay a licensed plumber to confirm the installation layout, water pressure and space requirements.
COMMON QUESTIONS
West Palm Beach water questions, answered.
Where does the West Palm Beach water report come from?
This guide uses the named utility records from our county reports, with local utility links where available. The supplier, sampling period and source stay attached to each result. Confirm the provider on your bill before applying a result to your home.
Is the water in West Palm Beach hard?
Check the water-hardness highlight for the selected provider. It distinguishes a utility result, a regional estimate and unavailable data. A regional estimate is not a measurement of treated water at your tap. Test your incoming water to confirm hardness for system sizing.
Should I add a water softener in West Palm Beach?
A softener is recommended for scale control when the reported or measured hardness supports it. The recommendation beside the highlights explains that distinction. Unknown hardness is not zero; test it before selecting and programming a softener.
Which whole-house filter should I choose for a West Palm Beach home?
Start with a whole-house filter sized for your bathrooms and simultaneous water use. Match its treatment media and verified model-specific reduction claims to your goals. A softener reduces hardness minerals. You choose, hire and pay your own licensed plumber for installation.
Do I need to enter my home address?
No. Answer the home-sizing questions to get started. Your licensed plumber confirms the installation fit. A street address is not required in the matching form.
Sources, dates & how to read this page
Each highlight links to its source. Open the full report for the longer tables, sampling details and additional source documents. A date on one result does not update every other result on the page.
- City of West Palm Beach · local utility source
- Palm Beach County · full county guide
- Palm Beach County Water Utilities2014-09-23 – 2025-08-08
- USGS hardness classifications and limitations
Utility measurements take priority over regional estimates when they are available for that provider. Source dates are preserved. Hardness is converted using mg/L as CaCO₃ ÷ 17.1; regional estimates are not presented as home measurements.
YOUR WATER. YOUR HOME. YOUR SYSTEM.
Find the right fit for your home.
Continue with your water source, choose your home details and review your system.